Accessories
Printers
Porti kt40-printer is designed specially for vehicles. Printer works in 12 volt systems (external adapter available for 24v systems). Adapter cables for different usages are available on request.New! Porti printer is now available also with Bluetooth-adapter, which makes it easy to use it for printing with for example different PDA-devices in the vehicle.
Pulse dividers
If pulse count received from the vehicle is too high, the incoming pulses can be divided with a special divider. Dividers are general purpose devices (suitable for any measurement system, not just Eltrips) and available at /4, /8 and /16 division factors.
Installation bracket
Installation bracket makes meter installation easier if there is no suitable place for the meter at the vehicle cockpit otherwire. Installation bracket can be installed for example on top of dashboard or between dashboard and air vent, where it offers level surface for device installations.
Sensors
These days speed pulse often is not available in new devices directly. Often CAN bus adapter can be used for meter connection, but best measurement result (especially when vehicle stops often during measurement) can be achieved with a sensor installed to vehicle's wheel or drive axle.
Magnetic sensor ET-RD
ET-RD-sensor detects magnet and can be used in almost every small car. Magnets are installed for example
at brake disc or drive shaft where they provide pulse every time they pass near the sensor.
ET-RD sensor has size of M10 x 36 mm (+15mm for the cable). Detection distance depends on magnets and generally is approx 5 mm.
Inductive sensor ET-4G
Inductive sensor is often used in heavy work machinery where sensor is installed at drive shaft where it will detect bolt head or other suitable piece of metal whenever it comes near. ET-4G sensor has size of M12 x 32 mm (+15 mm for cable). Detection distance is approx 2-3 mm.